E-mail：gufeng@sdgubang.com tel：86-0539-5552222  

导航
这是描述信息
Your location：
Homepage
/
News Center
/
Industry news
/
Matters needing attention when using silicone sealant for building curtain wall
Check category

News

Chairman and General Manager Fang Dongbao's message in 2023 2023年02月03日
Basic properties of sealants 2021年08月26日
Special News - Free Glue Gun for Cotton Clothes 2021年12月30日
How to choose sealant products 2021年08月26日
Due to the increasing number of product brands of sealants, the selection should be made according to the use conditions of the sealing part,
Analysis of the cause of air bubbles in sealant construction 2021年08月26日
There are many reasons that cause the sealant to foam during the construction process, such as air entrapped in the glue injection; the surface temperature of the substrate is too high; the spring climate in the northern region is dry; the foam stick is deflated; The interface is wet when glueing; the temperature difference between day and night is large; the thermal expansion and contraction of the interface are large, etc., which will cause bubbles in the sealant. We need to determine the specific cause of the bubble problem and solve it.

Matters needing attention when using silicone sealant for building curtain wall

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-08-26 10:10
  • Views:0

(Summary description)The silicone building sealant should be bonded on two sides in the joint, and should not be bonded on three sides.

Matters

Matters needing attention when using silicone sealant for building curtain wall

Matters needing attention when using silicone sealant for building curtain wall

Matters

Matters needing attention when using silicone sealant for building curtain wall

(Summary description)The silicone building sealant should be bonded on two sides in the joint, and should not be bonded on three sides.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-08-26 10:10
  • Views:0
Information
　　1. The silicone building sealant should be bonded on two sides in the joint, and should not be bonded on three sides.
　　2. Silicone building sealant should not be glued at night or in rainy days. The glue temperature should meet the design requirements and product requirements. The glued surface should be clean and dry before glueing.
　　3. The construction thickness of silicone building sealant should be greater than 35mm, the construction width should not be less than 2 times the construction thickness, and the bottom of the deep sealing groove should be filled with polyethylene foam material.

Scan the QR code to read on your phone

Previous What are the characteristics of silicone structural sealant
Next None
上一篇 What are the characteristics of silicone structural sealant
下一篇 None

CONTACT

Address: Linyi, China (No. 01, Pioneering Industrial Park, Zhuangwu Town, Lanling County, Linyi City, Shandong Province)

微信公众号

WeChat public account

wb

Enterprise Sina Weibo

  ↵

 Copyright ©Shandong Gufeng Technology Co., Ltd. All rights reserved.       鲁ICP备2021036715号-1      Powered by  www.300.cn